clean lines

How to clean lines on an MFP – Sharp MX-2614

If you have unwanted lines appearing on prints and copies, the device may need to be internally cleaned. Use the following procedure, and if the problem persists, please call to arrange a service call.

Step 1 – Open the main panel at the front of the MFP

Step 2 – Remove the waste toner box by moving the green switch to the left, then pulling it out

Step 3 – Detach the green rod found on the inside of the panel

Step 4 – Insert the green rod into the cleaning slot and brush it out a few times

Step 5 – Place the cleaning rod back onto its clip, then re-insert the waste toner box.

Step 6 – Close the main panel and perform a test print