How To Change a Staple Cartridge – Sharp Photocopier
Open the door found on the front of the staple module (found next to the main screen).
Remove the spent staple cartridge by gently pulling down on the green flap then carefully pulling it out.
Remove the staple case (clear plastic) by firmly holding the sides and pressing down on the front section (shown with an arrow on the case).
Insert the new staple case into the cartridge. Move the bottom edge in first and make sure the front end clicks into place,
Put the staple cartridge back into the staple module, making sure that it clicks into place. Close the door to finish the process.