How To Clean Lines On Prints – Sharp Photocopier
Step 1
Open the front 'draw-bridge' style panel
Step 2
Remove the waste toner box using the green tabs found on either side
Step 3
There are holes marked with green arrows located under the waste toner box. The arrows with the green background are for use with the green rod. The green arrows with the black background are for use with the grey rod.
Step 4
Use the green cleaning rod first, inserting it into the holes marked with the arrows with a green background. Push the rods into and out of each hole a few times to clean them.
Step 5
Use the grey cleaning rod secondly, inserting it into the holes marked with the arrows with a black background. Push the rods into and out of each hole a few times to clean them.
Step 6
Re-insert the waste toner box, making sure it clicks back into place
Step 7
Close the front panel